Continuous filament mat is made up of continuous fiberglass strand (Its main raw material is continuous fiberglass strand). It is containing an insoluble for unsaturated polyester, epoxy, phenolics and polyurethane resin compatibility in unfilled or filled resin system. It could be used for RTM, infusion, pultrusion process etc., for example automotive inner decorative parts and cable insulation materials.

FIBERGLASS CONTINUOUS MAT

E/C  Glass

50mm-3300mm

200g/m2-800g/m2

 

 

Date Sheet

 Product Introduction

Product Characteristics

High breaking strength of dry and wet condition

Easily conforms to complex shapes, while providing a smooth finished surface

Rapid wet-through

Packaging And Storage

Each product is wound onto a paper tube which has an inside diameter of 76mm. Each roll is wrapped up in plastic film and then packed in a cardboard box. The carton are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.Unless otherwise specified, product should be stored in a cool, dry, water-proof area It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively.