The carbon fiber composite mat consists of Carbon fiber surface tissue and Chopped Strand Mat. It can be applied in conductive fields. Without any chemical bonding, It has good resin   infiltration,uniform fiber distribution, even thickness, high wet tenacity, and good designability. Overcome the break and wrinkle shortcoming.

CARBON FIBER COMPOSITE MAT

E/C/ECR-Glass

50mm-3300mm

20g/m2-120g/m2

 

​​​​​​​

Data Sheet

Product Introduction

Product Characteristics

Widely used in vacuum, hand lay up, pultrusion, RTM and other molding products, such as hull, wind turbine blades,automotive parts, sports equipment and other FRP products.

Packaging And Storage

Each product is wound onto a paper tube which has an inside diameter of 76mm. Each roll is wrapped up in plastic film and then packed in a cardboard box. The carton are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.Unless otherwise specified, product should be stored in a cool, dry, water-proof area It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively.